Añadir título
This is a text area
CHARACTERISTICS
Fluid and expansive.
High resistance.
For anchoring of pieces.
Class R4.
High resistance.
For anchoring of pieces.
Class R4.
APPLICATIONS:
Expansive mortar to anchoring of pieces.
Suitable for anchor filling jobs such as concrete wall plates, pillars, columns, machinery, etc.
Suitable for anchor filling jobs such as concrete wall plates, pillars, columns, machinery, etc.
SUPPORTS:
The support must be clean and absorbent in addition to having good resistance.
Highly absorbent and / or hot surfaces should be moistened when using the product.
No plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present a good absorption and acceptable consistency.
Application thickness from 1 to 50 cm.
Highly absorbent and / or hot surfaces should be moistened when using the product.
No plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present a good absorption and acceptable consistency.
Application thickness from 1 to 50 cm.
COMPOSITION:
Special cements, selected aggregates and inorganic and organic additives.
PREPARATION OF THE MIXTURE:
Water dosage: 16% ± 2% (± 4 liters / sack).
Knead until you get a homogeneous mixture and let stand for 3 to 5 minutes.
Performance approx. x 1.9 Kg x liter to fill.
Knead until you get a homogeneous mixture and let stand for 3 to 5 minutes.
Performance approx. x 1.9 Kg x liter to fill.
PRODUCT APPLICATION:
Pour the product after mixing to obtain the best result and take advantage of its expansive properties and fluidity.
RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.
Respect the instructions for use.
For more information request technical and safety data sheet.