Añadir título
This is a text area
CHARACTERISTICS
Adhesive mortar.
For glass block wall factory.
Waterproof.
APPLICATIONS:
Adhesive Mortar.
Suitable for traditional glass block masonry work.
Assembly and internal and external grouting.
SUPPORTS:
Glass blocks must be clean and have good strength.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present good absorption and acceptable consistency.COMPOSITION:
White cement, aggregates and additives.
PREPARATION OF THE MIXTURE:
Water dosage: 22% ± 2% (± 5.5 liters / sack).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield with blocks 20x20x8 cm +/- 12 Kg / m².
PRODUCT APPLICATION AS A PLASTER:
According to the traditional system with palaustre.
Once assembled and grouting, proceed to clean it with a damp sponge.
After 24 hours do final cleaning with a cloth or scouring pad.
Application thickness up to 20mm.Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.For more information request technical data sheet and or safety.