Añadir título
This is a text area
CHARACTERISTICS
Impervious to rain water.
Maximum vapor permeability.
It prevents the appearance of stains due to humidity or salt.
APPLICATIONS:
Coating mortar as a treatment for dampness in baseboards with capillary lift problems.
Interior and exteriors.
Brick (hollow or solid) concrete block, natural stone.
PREPARATION OF THE MIXTURE:
Water dosage: 23% ± 2% (± 5.5 liters / sack).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. for 1mm thick 1.3 Kg / m²
PRODUCT APPLICATION AS A PLASTER:
With the wet support apply the product as a splash or patch until getting about 2cm thick.
Smooth loosely so as not to close the pore.
For greater thicknesses, we can apply a second coat, assembling the mortar in sandwich mode with mesh.
Float using a wood trowel, do not use a metal trowel or exert too much pressure during the process, as this will produce a superficial occlusion of the pores.
Once hardened, perform the desired finish with lime stucco, silicate and / or siloxane paint.
Application thickness from 5 to 30mm in two layers.
RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.
For more information request technical data sheet and or safety.