Añadir título
This is a text area
CHARACTERISTICS
Better plastering.
Waterproofed.
Fine finish.
Indoor and outdoor.
Waterproofed.
Fine finish.
Indoor and outdoor.
APPLICATIONS:
Fine finish coating.
Water-repellent mortar to cover already plastered walls.
Indoor and outdoor.
Permeable to water vapor.
Water-repellent mortar to cover already plastered walls.
Indoor and outdoor.
Permeable to water vapor.
SUPPORTS:
Mortar plasters.
The support must be flat and absorbent in addition to having good resistance.
With bonding bridge: smooth concrete.
Consult other supports.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present good absorption and acceptable consistency.
The support must be flat and absorbent in addition to having good resistance.
With bonding bridge: smooth concrete.
Consult other supports.
Not admissible: plaster or plaster supports, painted supports, waterproofed supports and, in short, any support that does not present good absorption and acceptable consistency.
COMPOSITION:
White cement, siliceous and / or calcareous aggregates and organic and inorganic additives.
PREPARATION OF THE MIXTURE:
Water dosage: 21% ± 2% (± 5 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes.
Yield approx. for 1mm thick 1.7 Kg / m²
PRODUCT APPLICATION:
Spread the product with a trowel and smooth it it a maximum thickness of 8mm.
Once partially hardened, float.
For a finer finish after trowelling, trowel again and / or brush the surface.
Application thickness not exceeding 8 mm.
Once partially hardened, float.
For a finer finish after trowelling, trowel again and / or brush the surface.
Application thickness not exceeding 8 mm.
RECOMMENDATIONS:
Do not apply in rain, strong wind or direct sunlight.
Respect the instructions for use.
For more information request technical data sheet and or safety.