Añadir título
This is a text area
CHARACTERISTICS
For heavily traveled pavements and large surfaces.
Quick commissioning.
High adherence.
For any type of format.
Cementitious adhesive.
Quick commissioning.
High adherence.
For any type of format.
Cementitious adhesive.
APPLICATIONS:
Quick setting glue mortar for laying all kinds of ceramic tiles of any format with or without absorption, indoors and outdoors.
Floors and walls.
Floors and walls.
SUPPORTS:
Cement-based floors, self-leveling mortars.
Walls: plastered with sand and cement, brick factories, blocks, etc.
With bonding bridge: smooth concrete.
Other supports, consult.
Walls: plastered with sand and cement, brick factories, blocks, etc.
With bonding bridge: smooth concrete.
Other supports, consult.
COMPOSITION:
Cements , siliceous and /or calcareous aggregates.
Resins and organic and inorganic additives.
PREPARATION OF THE MIXTURE:
Water dosage: 26% ± 2% (± 6.5 liters bag).
Knead until you get a homogeneous paste and let it rest for 3 to 5 minutes. Mix again.
Yield approx. simple gluing 4-5 Kg / m².
PRODUCT APPLICATION:
Spread the product in the traditional way using a trowel and double gluing for large formats.
Laying the tiles and pressing until a good settlement and distribution of the product is achieved.
Eliminate the excess material in the ceramic joints to achieve a better bond.
It is advisable to leave joints between tiles of at least 2mm indoors and 5mm outdoors.
RECOMMENDATIONS:
Respect the mixing water.
The application temperature should be between 5 ° C and 30 °.
Protect from wind currents.
For more information request technical data sheet and or safety.